MySQL 9.0 发行说明
您可以离线或在服务器运行时配置 InnoDB 缓冲池大小。本节中描述的行为适用于这两种方法。有关在线配置缓冲池大小的更多信息，请参见 在线配置 InnoDB 缓冲池大小。
当增加或减少 innodb_buffer_pool_size 时，操作将分块进行。块大小由 innodb_buffer_pool_chunk_size 配置选项定义，其默认值为 128M。有关更多信息，请参见 配置 InnoDB 缓冲池块大小。
缓冲池大小必须始终等于或为 innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances 的倍数。如果将 innodb_buffer_pool_size 配置为不等于或不为 innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances 的倍数，则缓冲池大小会自动调整为等于或为 innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances 的倍数。
在以下示例中，innodb_buffer_pool_size 设置为 8G，innodb_buffer_pool_instances 设置为 16。 innodb_buffer_pool_chunk_size 为 128M，这是默认值。
8G 是一个有效的 innodb_buffer_pool_size 值，因为 8G 是 innodb_buffer_pool_instances=16 * innodb_buffer_pool_chunk_size=128M 的倍数，即 2G。
$> mysqld --innodb-buffer-pool-size=8G --innodb-buffer-pool-instances=16mysql> SELECT @@innodb_buffer_pool_size/1024/1024/1024;
+------------------------------------------+
| @@innodb_buffer_pool_size/1024/1024/1024 |
+------------------------------------------+
| 8.000000000000 |
+------------------------------------------+在此示例中，innodb_buffer_pool_size 设置为 9G，innodb_buffer_pool_instances 设置为 16。 innodb_buffer_pool_chunk_size 为 128M，这是默认值。在这种情况下，9G 不是 innodb_buffer_pool_instances=16 * innodb_buffer_pool_chunk_size=128M 的倍数，因此 innodb_buffer_pool_size 将调整为 10G，这是 innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances 的倍数。
$> mysqld --innodb-buffer-pool-size=9G --innodb-buffer-pool-instances=16mysql> SELECT @@innodb_buffer_pool_size/1024/1024/1024;
+------------------------------------------+
| @@innodb_buffer_pool_size/1024/1024/1024 |
+------------------------------------------+
| 10.000000000000 |
+------------------------------------------+
innodb_buffer_pool_chunk_size 可以以 1MB（1048576 字节）为单位增加或减少，但只能在启动时、命令行字符串中或 MySQL 配置文件中修改。
命令行
$> mysqld --innodb-buffer-pool-chunk-size=134217728配置文件
[mysqld]
innodb_buffer_pool_chunk_size=134217728更改 innodb_buffer_pool_chunk_size 时，以下条件适用
如果新的
innodb_buffer_pool_chunk_size值 *innodb_buffer_pool_instances大于缓冲池初始化时的当前缓冲池大小，则innodb_buffer_pool_chunk_size将被截断为innodb_buffer_pool_size/innodb_buffer_pool_instances。例如，如果缓冲池初始化的大小为
2GB（2147483648 字节），4个缓冲池实例，块大小为1GB（1073741824 字节），则块大小将被截断为等于innodb_buffer_pool_size/innodb_buffer_pool_instances的值，如下所示$> mysqld --innodb-buffer-pool-size=2147483648 --innodb-buffer-pool-instances=4 --innodb-buffer-pool-chunk-size=1073741824;mysql> SELECT @@innodb_buffer_pool_size; +---------------------------+ | @@innodb_buffer_pool_size | +---------------------------+ | 2147483648 | +---------------------------+ mysql> SELECT @@innodb_buffer_pool_instances; +--------------------------------+ | @@innodb_buffer_pool_instances | +--------------------------------+ | 4 | +--------------------------------+ # Chunk size was set to 1GB (1073741824 bytes) on startup but was # truncated to innodb_buffer_pool_size / innodb_buffer_pool_instances mysql> SELECT @@innodb_buffer_pool_chunk_size; +---------------------------------+ | @@innodb_buffer_pool_chunk_size | +---------------------------------+ | 536870912 | +---------------------------------+缓冲池大小必须始终等于或为
innodb_buffer_pool_chunk_size*innodb_buffer_pool_instances的倍数。如果更改innodb_buffer_pool_chunk_size，则innodb_buffer_pool_size会自动调整为等于或为innodb_buffer_pool_chunk_size*innodb_buffer_pool_instances的倍数。调整发生在缓冲池初始化时。以下示例演示了这种行为# The buffer pool has a default size of 128MB (134217728 bytes) mysql> SELECT @@innodb_buffer_pool_size; +---------------------------+ | @@innodb_buffer_pool_size | +---------------------------+ | 134217728 | +---------------------------+ # The chunk size is also 128MB (134217728 bytes) mysql> SELECT @@innodb_buffer_pool_chunk_size; +---------------------------------+ | @@innodb_buffer_pool_chunk_size | +---------------------------------+ | 134217728 | +---------------------------------+ # There is a single buffer pool instance mysql> SELECT @@innodb_buffer_pool_instances; +--------------------------------+ | @@innodb_buffer_pool_instances | +--------------------------------+ | 1 | +--------------------------------+ # Chunk size is decreased by 1MB (1048576 bytes) at startup # (134217728 - 1048576 = 133169152): $> mysqld --innodb-buffer-pool-chunk-size=133169152 mysql> SELECT @@innodb_buffer_pool_chunk_size; +---------------------------------+ | @@innodb_buffer_pool_chunk_size | +---------------------------------+ | 133169152 | +---------------------------------+ # Buffer pool size increases from 134217728 to 266338304 # Buffer pool size is automatically adjusted to a value that is equal to # or a multiple of innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances mysql> SELECT @@innodb_buffer_pool_size; +---------------------------+ | @@innodb_buffer_pool_size | +---------------------------+ | 266338304 | +---------------------------+此示例演示了相同的行为，但使用了多个缓冲池实例
# The buffer pool has a default size of 2GB (2147483648 bytes) mysql> SELECT @@innodb_buffer_pool_size; +---------------------------+ | @@innodb_buffer_pool_size | +---------------------------+ | 2147483648 | +---------------------------+ # The chunk size is .5 GB (536870912 bytes) mysql> SELECT @@innodb_buffer_pool_chunk_size; +---------------------------------+ | @@innodb_buffer_pool_chunk_size | +---------------------------------+ | 536870912 | +---------------------------------+ # There are 4 buffer pool instances mysql> SELECT @@innodb_buffer_pool_instances; +--------------------------------+ | @@innodb_buffer_pool_instances | +--------------------------------+ | 4 | +--------------------------------+ # Chunk size is decreased by 1MB (1048576 bytes) at startup # (536870912 - 1048576 = 535822336): $> mysqld --innodb-buffer-pool-chunk-size=535822336 mysql> SELECT @@innodb_buffer_pool_chunk_size; +---------------------------------+ | @@innodb_buffer_pool_chunk_size | +---------------------------------+ | 535822336 | +---------------------------------+ # Buffer pool size increases from 2147483648 to 4286578688 # Buffer pool size is automatically adjusted to a value that is equal to # or a multiple of innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances mysql> SELECT @@innodb_buffer_pool_size; +---------------------------+ | @@innodb_buffer_pool_size | +---------------------------+ | 4286578688 | +---------------------------+更改
innodb_buffer_pool_chunk_size时应谨慎，因为更改此值可能会增加缓冲池的大小，如上面的示例所示。在更改innodb_buffer_pool_chunk_size之前，请计算对innodb_buffer_pool_size的影响，以确保生成的缓冲池大小是可以接受的。
注意
为了避免潜在的性能问题，块数（innodb_buffer_pool_size / innodb_buffer_pool_chunk_size）不应超过 1000。
可以使用 SET 语句动态设置 innodb_buffer_pool_size 配置选项，允许您在不重启服务器的情况下调整缓冲池大小。例如
mysql> SET GLOBAL innodb_buffer_pool_size=402653184;注意
缓冲池大小必须等于或为 innodb_buffer_pool_chunk_size * innodb_buffer_pool_instances 的倍数。更改这些变量设置需要重启服务器。
在调整缓冲池大小之前，应完成通过 InnoDB API 执行的活动事务和操作。当启动调整大小操作时，该操作要等到所有活动事务完成才会开始。一旦调整大小操作开始，需要访问缓冲池的新事务和操作必须等到调整大小操作完成。唯一的例外是，当缓冲池被碎片整理且页面被撤回时，缓冲池大小减少，允许并发访问缓冲池。允许并发访问的缺点是，在撤回页面时，可能会暂时出现可用页面短缺。
注意
如果在缓冲池调整大小操作开始后启动，嵌套事务可能会失败。
变量 Innodb_buffer_pool_resize_status 报告一个字符串值，指示缓冲池调整大小进度；例如
mysql> SHOW STATUS WHERE Variable_name='InnoDB_buffer_pool_resize_status';
+----------------------------------+----------------------------------+
| Variable_name | Value |
+----------------------------------+----------------------------------+
| Innodb_buffer_pool_resize_status | Resizing also other hash tables. |
+----------------------------------+----------------------------------+您还可以使用变量 Innodb_buffer_pool_resize_status_code 和 Innodb_buffer_pool_resize_status_progress 来监控在线缓冲池调整大小操作，这些变量报告数值，更适合于程序监控。
状态变量 Innodb_buffer_pool_resize_status_code 报告一个状态码，指示在线缓冲池调整大小操作的阶段。状态码包括
0：没有进行调整大小操作
1：启动调整大小
2：禁用 AHI（自适应哈希索引）
3：撤回块
4：获取全局锁
5：调整池大小
6：调整哈希表大小
7：调整大小失败
状态变量 Innodb_buffer_pool_resize_status_progress 报告一个百分比值，指示每个阶段的进度。每个缓冲池实例处理后，百分比值都会更新。当状态（由 Innodb_buffer_pool_resize_status_code 报告）从一个状态变为另一个状态时，百分比值将重置为 0。
以下查询返回一个字符串值，指示缓冲池调整大小进度，一个代码指示操作的当前阶段，以及该阶段的当前进度，以百分比值表示
SELECT variable_name, variable_value
FROM performance_schema.global_status
WHERE LOWER(variable_name) LIKE "innodb_buffer_pool_resize%";缓冲池调整大小进度也显示在服务器错误日志中。此示例显示了在增加缓冲池大小期间记录的注释
[Note] InnoDB: Resizing buffer pool from 134217728 to 4294967296. (unit=134217728)
[Note] InnoDB: disabled adaptive hash index.
[Note] InnoDB: buffer pool 0 : 31 chunks (253952 blocks) was added.
[Note] InnoDB: buffer pool 0 : hash tables were resized.
[Note] InnoDB: Resized hash tables at lock_sys, adaptive hash index, dictionary.
[Note] InnoDB: completed to resize buffer pool from 134217728 to 4294967296.
[Note] InnoDB: re-enabled adaptive hash index.此示例显示了在减小缓冲池大小期间记录的注释
[Note] InnoDB: Resizing buffer pool from 4294967296 to 134217728. (unit=134217728)
[Note] InnoDB: disabled adaptive hash index.
[Note] InnoDB: buffer pool 0 : start to withdraw the last 253952 blocks.
[Note] InnoDB: buffer pool 0 : withdrew 253952 blocks from free list. tried to relocate
0 pages. (253952/253952)
[Note] InnoDB: buffer pool 0 : withdrawn target 253952 blocks.
[Note] InnoDB: buffer pool 0 : 31 chunks (253952 blocks) was freed.
[Note] InnoDB: buffer pool 0 : hash tables were resized.
[Note] InnoDB: Resized hash tables at lock_sys, adaptive hash index, dictionary.
[Note] InnoDB: completed to resize buffer pool from 4294967296 to 134217728.
[Note] InnoDB: re-enabled adaptive hash index.使用 --log-error-verbosity=3 启动服务器，在在线缓冲池调整大小操作期间，将额外的信息记录到错误日志。附加信息包括 Innodb_buffer_pool_resize_status_code 报告的状态码和 Innodb_buffer_pool_resize_status_progress 报告的进度百分比值。
[Note] [MY-012398] [InnoDB] Requested to resize buffer pool. (new size: 1073741824 bytes)
[Note] [MY-013954] [InnoDB] Status code 1: Resizing buffer pool from 134217728 to 1073741824
(unit=134217728).
[Note] [MY-013953] [InnoDB] Status code 1: 100% complete
[Note] [MY-013952] [InnoDB] Status code 1: Completed
[Note] [MY-013954] [InnoDB] Status code 2: Disabling adaptive hash index.
[Note] [MY-011885] [InnoDB] disabled adaptive hash index.
[Note] [MY-013953] [InnoDB] Status code 2: 100% complete
[Note] [MY-013952] [InnoDB] Status code 2: Completed
[Note] [MY-013954] [InnoDB] Status code 3: Withdrawing blocks to be shrunken.
[Note] [MY-013953] [InnoDB] Status code 3: 100% complete
[Note] [MY-013952] [InnoDB] Status code 3: Completed
[Note] [MY-013954] [InnoDB] Status code 4: Latching whole of buffer pool.
[Note] [MY-013953] [InnoDB] Status code 4: 14% complete
[Note] [MY-013953] [InnoDB] Status code 4: 28% complete
[Note] [MY-013953] [InnoDB] Status code 4: 42% complete
[Note] [MY-013953] [InnoDB] Status code 4: 57% complete
[Note] [MY-013953] [InnoDB] Status code 4: 71% complete
[Note] [MY-013953] [InnoDB] Status code 4: 85% complete
[Note] [MY-013953] [InnoDB] Status code 4: 100% complete
[Note] [MY-013952] [InnoDB] Status code 4: Completed
[Note] [MY-013954] [InnoDB] Status code 5: Starting pool resize
[Note] [MY-013954] [InnoDB] Status code 5: buffer pool 0 : resizing with chunks 1 to 8.
[Note] [MY-011891] [InnoDB] buffer pool 0 : 7 chunks (57339 blocks) were added.
[Note] [MY-013953] [InnoDB] Status code 5: 100% complete
[Note] [MY-013952] [InnoDB] Status code 5: Completed
[Note] [MY-013954] [InnoDB] Status code 6: Resizing hash tables.
[Note] [MY-011892] [InnoDB] buffer pool 0 : hash tables were resized.
[Note] [MY-013953] [InnoDB] Status code 6: 100% complete
[Note] [MY-013954] [InnoDB] Status code 6: Resizing also other hash tables.
[Note] [MY-011893] [InnoDB] Resized hash tables at lock_sys, adaptive hash index, dictionary.
[Note] [MY-011894] [InnoDB] Completed to resize buffer pool from 134217728 to 1073741824.
[Note] [MY-011895] [InnoDB] Re-enabled adaptive hash index.
[Note] [MY-013952] [InnoDB] Status code 6: Completed
[Note] [MY-013954] [InnoDB] Status code 0: Completed resizing buffer pool at 220826 6:25:46.
[Note] [MY-013953] [InnoDB] Status code 0: 100% complete调整大小操作由一个后台线程执行。当增加缓冲池的大小，调整大小操作
以
块为单位添加页面（块大小由innodb_buffer_pool_chunk_size定义）转换哈希表、列表和指针以使用内存中的新地址
将新页面添加到空闲列表
在执行这些操作时，其他线程会被阻止访问缓冲池。
当减小缓冲池的大小，调整大小操作
对缓冲池进行碎片整理并撤回（释放）页面
以
块为单位删除页面（块大小由innodb_buffer_pool_chunk_size定义）转换哈希表、列表和指针以使用内存中的新地址
在这些操作中，只有对缓冲池进行碎片整理和撤回页面允许其他线程并发访问缓冲池。